3251 Olcott Street
Santa Clara, CA 95054
+1 (800) 446-3392
POSM Software version 1.8.224 or later (release date of or after 5/12/14)
PC that meets the minimum requirements to run POSM Portable software
Sensoray model 2253-S A/V MPEG-4,MJPEG,H.264
Encoder/Decoder with Overlay
BNC male to RCA female adapter
USB to RS-232 DB9 Serial converter cable
(recommend 3 to 5 foot long)
RCA to 3.5mm headphone adapter (If using the “audio capture”
feature
(recommend 3 to 5 foot long)
RCA Video cable
(recommend 3 to 5 foot long)
USB 2.0 A-Male to B-Male USB cable
(recommend 3 to 5 foot long)
Page 1 of 3
Visit POSM Software at www.posm.cc for more information
3251 Olcott Street
Santa Clara, CA 95054
+1 (800) 446-3392
1) Power on the vCam-5 control module
2) Press the F10 Menu key 2 times to enter the setup menu
3) Scroll down and select Video Out
4) Change the Video Out setting from “Camera” to “CVBS”
5) Check that the reel settings are correct in “Reel Settings”
6) Return to the main File Menu by pressing “ESC”
7) Turn off the vCam-5 control module
8) Plug the male end of the RS232 cable into the RS232 port of the control module
9) Plug the USB end of the RS232 to USB cable into an available USB port on the PC
10) Attach a BNC to RCA adaptor to the Video In socket of the Sensoray unit
11) Plug in the RCA Video cable, 1 end into the Video Out socket of the control module and the other end into the Video In socket of the Sensoray unit
12) Plug in the RCA Audio cable, 1 end into the Audio Out socket of the control module and the other end into the Audio In socket of the Sensoray unit. (Use a RCA Male to 3.5mm adapter if needed)
13) Plug in the USB 2.0 A-Male to B-Male USB cable, 1 end into the Sensoray unit and the other into an available UBS port on the PC
14) Turn on the PC and vCam-5 control module
15) Launch the POSM software
END
Page 2 of 3
3251 Olcott Street
Santa Clara, CA 95054
+1 (800) 446-3392
Page 3 of 3